Devine Onyx 6 User Manual Download Page 4

- The user should be able to stop the devices's power supply in case of emergencies. At least one of the 
following should therefore be accessible at all times: 

- the on/off switch on the back of the unit
- the power cable connector on the back of the unit
- the power socket the cable is plugged in to
- the power socket switch or extension cable switch

- Should the device not be used in the manner described in this user manual, damages or even injuries could
occur. Devine cannot be held responsible for any injuries or damages that occur as a result of improper use 
of this product.

Storage and transport:

– This product is designed for mobile use. If the product needs to be transported, it should be well-protected 
against damage. 
- This device is not designed for permanent (24/7) use. The expected lifespan of the device will not be 
affected by occasionally turning the device off. Disconnect the device or turn off the power when it is not 
actively in use.
- If the device will not be used for a longer period of time, it should be disconnected and stored in a dust-free 
environment. 
- Do not expose the device to extreme temperature differences. 

Housing

- Inspect the device's housing frequently, and always just before use. Avoid operating the device if there are 
large dents or cracks, or if screws are missing. Do not use the device if the housing is not in good condition. 
Contact your dealer or a qualified technician if you are unsure about the state of the device.
- Check the device and the screws for corrosion. Corrosion must not be present on this device. Contact your 
dealer or a qualified technician if you find any corrosion on the screws. 
Every power and signal connector should be securely mounted. Do not use the device if the connectors are 
not secure.

Avoid dust and dirt build-up. Clean the device once a month by disconnecting it from the power supply and 

wiping it down with a dry or slightly moist cloth. If the device is used frequently, the cleaning intervals should 
increase. 

Symbol explanation:

WEEE: 

Ensure that this device is disposed of properly. This product falls under the WEEE 

(Waste Electrical and Electronic Equipment) directive. The requirements of this directive apply
to all manufacturers and producers of electronic devices in the EU. Do not throw this product 
away with regular rubbish. Please contact your local authority for more information about how 
to recycle and dispose of these products in your region. By recycling this product in the proper
manner, we can work together to ensure that we can continue to enjoy these kinds of 
products and still protect the environment as much as possible from pollution. 

CE:

 The CE logo indicates that this product meets the European norms and requirements to 

which it must legally conform.

Only suitable for indoor use

: this product was only designed for indoor use. The maximum 

environmental temperature must not exceed 40 degrees Celsius (104 degrees Fahrenheit). 

The information in this user manual is subject to change at any time without notice.

Version: 1.0

Date of creation and author’s initials: 09-01-2020 RV Revision date and author’s initials: -

Summary of Contents for Onyx 6











Reviews: