Menu bar:
File: Select a device, create, save or load a data file
Edit: Functions for adjusting the parameters
Communication: Read data from your controller or export a new data file with new
parameters to your controller.
Help: Show the software version of the editor
Scene 1-4:
Click on the Scene button to adjust 1 of the 4 Scenes. A Scene is a snapshot of your
controller's parameters at that moment. You can toggle between multiple snapshots with the
Bank knob on the controller.
Device section
The Device section shows you a graphic representation of your device and all the
parameters you can change.
Control section
The Control section shows you a list of the available parameters that can be changed.
Parameter Edit section
The Parameter Edit section shows you what can be changed per parameter. Assign type,
CC/Note mode, on value, off value, Pad behaviour, and MIDI channel.
Parameter Display Switch
Above the edit section, you can select the parameters you want to look at in detail with the
Parameter Display Switch to adjust or adapt CC or Note messages to the controller.
Please note:
There are different parameters for each MIDI controller type, and not all parameters are
adjustable in some cases. The MIDI editor shows you which parameters can be adjusted
and which can not.
Using the EZ-Creator series with and without Bitwig
It is possible to use products from the EZ-Creator series with the Bitwig 8-Track DAW some
times and other DAWs, software or even another computer at other times.
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's
initials:23-06-2018 RV
Revision date and author's initials: -
