Please be aware that third-party software may need to be adapted to the controller. Always
consult the instructions pertaining to the software in question.
Compatibility with third-party software can not be guaranteed. Take note of the software
system requirements software and compare them to your computer's system requirements.
The included MIDI editor enable syou to change the following settings:
- adjust parameters via knob/fader/pad
- assign/change MIDI CC notes
- change the MIDI channel
- store settings and parameters for 4 scenes
- adjust the velocity sensitivity of keys/pads
If your computer does not have a CD drive to read the MIDI editor, then you can download a
digital version from the dealer's website (on the product page) or request that customer
service send you a digital copy via e-mail.
Explanation of the MIDI editor
Once the MIDI editor has been installed and
activated, you will be taken to a screen where
you can select a target model. Choose the
corresponding MIDI controller you have
connected. This looks as follows: (see right)
Select the correct model and click on 'OK'.
You can then change all assignable knobs,
faders and pads. This looks as follows: (see
right).
A short description of the functions the editor
has to offer is on the next page.
Some basic knowledge of MIDI is required to
make optimal use of the editor.
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's
initials:23-06-2018 RV
Revision date and author's initials: -
