Devine DI-P User Manual Download Page 4

- This device is not intended for permanent (24/7) use. Regular breaks in operation will ensure the expected 
lifespan of this device remains unchanged. Disconnect the device when not in use.
- If you do not plan to use the unit for an extended period of time, disconnect it and store it in a dust-free 
environment.
- Do not expose the device to extreme temperature differences.

Housing:

- Inspect the housing of the device frequently and always before use. Severe dents, cracks and missing 
screws should be avoided at all costs. Do not use the device when the housing is not in optimal condition. 
Contact your dealer or a skilled technician when in doubt about the state of the device.
- Check the fixture and screws for corrosion. Corrosion should not be present on the fixture. Contact your 
dealer or a skilled technician if corrosion is found on the fixture.
- Every power or signal chassis/connector should be attached securely and tightly. Do not use the device 
when connectors are loose.
- Avoid the buildup of dust and dirt. Clean the exterior of the fixture once a month with a dry or damp cloth. If 
you use the device intensively, increase cleaning frequency.

Symbol clarification:

WEEE: 

Dispose of this product properly. This product is part of the WEEE directive – the 

Waste Electrical and Electronic Equipment directive. The requirements stated in this directive 
apply to all manufacturers and producers of electronic equipment in the EU. 

Do not dispose of this product together with regular household trash. Contact your local 
government for more information about proper disposal and recycling of electronic products in
your region. By recycling this product properly after use, we can work together to enjoy these 
products and protect our environment from pollution.

CE: 

The CE mark indicates that the product complies with applicable European directives and

regulations. 

Indoor use only: This device is designed to be used indoors only. The maximum ambient 
temperature should not exceed 40 degrees Celsius (104 degrees Fahrenheit).

All information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 26-01-2016 RV Revision date + author initials:

Summary of Contents for DI-P








Reviews: