Devine Centro 2i2o User Manual Download Page 6

Contact your dealer or a qualified technician if you are unsure about the state of the 
device.
- Check the device and the screws for corrosion. Corrosion must not be present on this 
device. Contact your dealer or a qualified technician if you find any corrosion on the 
screws. 
Every power and signal connector should be securely attached. Do not use the device if 
the connectors are not secure.
- Avoid dust and dirt build-up. Clean the device once a month by disconnecting it from the 
power supply and wiping it down with a dry or slightly moist cloth. If the device is used 
frequently, the cleaning intervals should increase.

Symbol explanation:

WEEE: 

Ensure that this device is disposed of properly. This product falls

under the WEEE (Waste Electrical and Electronic Equipment) directive. 
The requirements of this directive apply to all manufacturers and 
producers of electronic devices in the EU. Do not throw this product 
away with regular rubbish. Please contact your local authority for more 
information about how to recycle and dispose of these products in your 
region. By recycling this product in the proper manner, we can work 
together to ensure that we can continue to enjoy these kinds of products
and still protect the environment as much as possible from pollution. 

CE:

 The CE logo indicates that this product meets the European norms 

and requirements to which it must legally conform.

Only suitable for indoor use

: this product was only designed for indoor

use. The maximum environmental temperature must not exceed 40 
degrees Celsius (104 degrees Fahrenheit).  

The informaton shown in this user manual is subject to change without further notice.

Version:
1.0

Date of creation and author's initials: 
24-10-2019 RV

Date of revision and author's initials:  -

Summary of Contents for Centro 2i2o


















Reviews: