Volume control is too loud
Turn the volume down
The tone controls for treble and/or
bass are too high or too low.
Turn the tone control back to 12
o'clock and listen to see clipping is
still audible.
Woofer or tweeter is defective
If a speaker is exposed to a loud,
distorted, or clipped signal for a
longer period of time, this can
cause permanent damage to its
internal components. If you
suspect that the woofer or tweeter
is damaged, contact your local
dealer for assistance.
Sound is dull
Tweeter is defective
Turn the speaker to an appropriate
volume (ensure that it's not too
loud) so that you can listen directly
to the tweeter with it close to your
ear. If the tweeter is not
responding it is probably defective
and you should contact your
dealer for assistance.
2-band EQ incorrectly set
Check the setting of the treble
control. If it's turned all the way
down (fully to the left), turn it back
to the neutral position (12 o'clock).
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials 23-09--2017 RV
Revision date and author's initials: -
