Protection during transport
The Devine Roadster is easy to transport, but it is not (splash)proof. It is therefore recommended to take
precautions when transporting the device outdoors in rain or adverse weather conditions. Should the device
be exposed to rain or moisture, allow it to dry completely before using it. If this is not done, a short circuit
could occur, which can cause permanent damage and/or injury.
Grille
The Devine Roadster is equipped with a metal grille on the front which protects the speaker components.
Audio technology
The Roadster features the very latest in audio technology. By adhering to the following tips and instructions,
you are making the most of what this speaker has to offer with the very best possible audio and performance
quality.
Line output
The line output of this battery-powered speaker enables you to link multiple Roadsters or other devices with
a line input. This way, you enlarge the audio dispersion and increase the total performance of your sound
system.
It consists of a TRS jack connector that transmits a stereo signal.
Instrument input
The instrument input is suitable for connecting a device that requires active amplification like an electro-
acoustic guitar with a built-in preamp, for instance. The Roadster is less suitable for the direct amplification of
an electric guitar with passive electronics, but it can be still used for this purpose.
The instrument input is fitted with an unbalanced TS jack connector that expects a mono signal.
Microphone input
The microphone input can be used to connect the included microphone or a different microphone of your
choice.
It is designed for dynamic microphones and has an unbalanced TS jack connector.
Connecting a cable with a TRS connector may cause problems. Always use the included cable for
connecting the microphone.
Aux input
The aux input is suitable for any device that transmits a line signal such as tablets, computers, MP3 players,
smartphones, DJ controllers, PA mixers, CD players, and countless other devices that are equipped with an
RCA connector or a mini jack plug.
When linking devices, it’s also possible to connect the jack output of the first Roadster to the aux input of a
second Roadster. This will ensure that both speakers reproduce the same audio.
LED power indicators
The LED battery status indicators are located on top of the Roadster. As long as the green LEDs are lit, the
device can be used to produce sound. If the red LEDs light up, it is recommended to connect the speaker to
a mains socket immediately so the battery can charge.
Volume and tone control
The Roadster is equipped with a volume control for the following components:
– volume control for instrument input
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:: 6-01-2017 RV
Revision date and author's initials: -
