DeVilbiss SRiPro Lite Micro, Service Manual

Page: 2 / 72

EN
P1 =
FUNCTIONAL DESCRIPTION
CONNECTIONS
Solvent resistant
Chrome plated steel
Trigger
SPECIFICATIONS
Fluid Tip, Fluid Needle and Trigger Stud
WEIGHT
Gun Air Inlet Pressure for High Efficiency and HVLP setups, with gun
triggered.
2.0 bar [29 psi]
Springs, Clips, Screws
Air Valve Assembly
Air Inlet Size Universal 1/4" BSP and 1/4" NPS male
Fluid Inlet Size 7/16" - 14 UNC
Chrome plated brass
Gun Body, Air Cap Retaining Ring, Knobs Anodized Aluminium
12 bar [175 psi]
Air Inlet, Body Bushing, Spreader Valve Body, Air Valve Nut
135 x 163 x 18 L x H x W mm
<2.5 m/s²
Stainless Steel, HDPE
Air Cap Nickel plated brass
AIR INLET PRESSURES
ENVIRONMENTAL
Max Ambient Operating Temperature 104
°
F [40
°
C]
MATERIALS OF CONSTRUCTION
Stainless Steel
Vibration Level:
Sound Power Level:
Sound Pressure Level:
Available on request
Available on request
Seals, Gaskets
Max Static Air Input Pressure
Stainless Steel
GUN ONLY
The SRiPro Lite spray gun is a professional quality gun designed with both High Efficiency or high volume, low
pressure (HVLP) technology. HVLP technology reduces overspray and limits air cap pressure to 0.7 bar [10 psi],
(complies with rules issued by SCAQMD and other air quality authorities). High Efficiency technology, when
tested under recommended conditions, has been found to exceed 65% transfer efficiency.
IMPORTANT: This spraygun is suitable for use with both waterbased and solvent based coating materials. The
gun is not designed for use with highly corrosive and/or abrasive materials and if used with such materials it
must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt
regarding the suitability of a specific material, contact your DeVilbiss Distributor or DeVilbiss direct.
395g
DIMENSIONS
SB-2-512 R1
2/24
www.carlisleft.com