background image

Page 4     SB-6-159-H

MAINTENANCE - hAF-517 

ChARCOAL FILTER

1.  Before performing maintenance on 

 

unit, close any main shut-off valve 

 

located upstream of filter. Bleed off 

 

residual air in unit.

2.  To open filter, press button located  

 

on clamp ring and rotate ring either 

 

clockwise or counterclockwise while 

 

pulling down on ring. The metal bowl 

 

guard and plastic bowl can then be 

 

removed from the filter body.

3.  Remove the filter element by loosen- 

 

ing counterclockwise. Clean or replace 

 

the filter element. Replace the char- 

 

coal element when it no longer re- 

 

moves oil vapor odors or when the 

 

red indicator is visible.

4.  Inspect o-ring for damage. Replace if 

 necessary.

5. Inspect plastic bowl for signs of dam- 
 

age such as cracks, crazing or deterio- 

 

ration. Replace if necessary. 

 

hAF-517  Parts List

   Replace-   

Ind.

 Ref.  ment 

 

Parts

  No.  Part No. 

Description 

Req.

  1  HAF-404 

Filter Change Ind. 

1

   

 

  (Not shown)

  1A     --- 

Body 

1

  2     --- 

O-Ring 

1

  3  HAF-36 

Filter Element and 

1

   

   

  O-Ring Kit

  4  HAF-11 

Manual Drain 

1

  5  HAF-8 

Plastic Bowl 

1

  6  HAF-19 

Metal Bowl Guard 

1

  7  HAF-409 

Clamp Ring 

1

MAINTENANCE -  COALESCINg FILTER

hAF-505

1.  Before performing maintenance on unit, close any main shut-off valve  

 

located upstream of filter. Bleed off residual air in unit.

2.  To open filter, press button located on clamp ring and rotate ring either 

 

clockwise or counterclockwise while pulling down on ring. The metal bowl 

 

guard and plastic bowl can then be removed from the filter body.

3.  Remove the filter element by loosening counterclockwise. Clean or replace 

 

the filter element. Frequency of element replacement will depend upon air  

 

quality, air usage and condition of the air piping. It is recommended to  

 

check the element change indicator daily and replace element when  

 

indicator turns red. 

4.  Inspect o-ring for damage. Replace if necessary.

5.  Inspect plastic bowl for signs of damage such as cracks, crazing or deteriora- 

 

tion. Replace if necessary.  

Note

6.  The filter change indicator only operates when air is flowing. It will always be 

 

green when there is no air flow.

Figure 4 -  hAF-505

hAF-505  Parts List

    

 

Ind.

 Ref.  Replacement   

Parts

  No.  Part No. 

Description 

Req.

  

HAF-404 

Filter Change Ind. 

1

 

 

 

  (Not shown)

 1A   

Body 

1

 2   

O-Ring 

1

  3 

HAF-28 

Filter and O-Ring Kit 

1

  4 

HAF-18 

Automatic Drain 

1

  5 

HAF-8 

Plastic Bowl 

1

  6 

HAF-19 

Metal Bowl Guard 

1

  7 

HAF-409 

Clamp Ring 

1

Figure 5 - hAF-517

1 (not shown)

5

6

7

1A

3

2

4

1A

1

 (Indicator Not shown)

2

3

4

7

6

5

Summary of Contents for DAD-503









Reviews: