background image

6- ENG

D25689

Note:

Photographs and line drawings used in this manual are for reference only and

do not represent a specific model.

CARTON CONTENTS

Bagged Handle

Bagged Parts

Nozzle Cleaning

Kit

Engine Frame and

Wheel Assembly

High

Pressure

Hose

Chemical

Hose

Engine Oil

Spray Gun

Knobs

Saddle
Bolts

Quick Connect Wand

Grommet Kit

with Quick

Connect Nozzles

Engine

Manual

Handle

Parts

Manual

English/

Spanish/

French

Operator’s

Manual

The powerful spray from your pressure washer is capable of causing
damage to surfaces such as wood, glass, automobile paint, auto striping

and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to
be cleaned to assure yourself that it is strong enough to resist damage from the force of the
spray. Avoid the use of the concentrated spray stream except for very strong surfaces like
concrete and steel.

Operating without flow of water will result in equipment damage. Operating the pressure wash-
er with water supply shutoff will void your warranty. You should never run this pressure washer
for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and
the heated (recirculated) water to exit. 

Summary of Contents for D25689-E





















Reviews: