background image

5 - ENG

D22073

MOVING PARTS

 SUCH AS THE PULLEY, FLYWHEEL AND BELT

CAN CAUSE SERIOUS INJURY

  IF THEY COME INTO CONTACT

WITH YOU OR YOUR CLOTHING.

ATTEMPTING TO OPERATE

 COMPRESSOR 

WITH DAMAGED

OR MISSING PARTS  OR ATTEMPTING TO REPAIR COM-
PRESSOR WITH PROTECTIVE SHROUDS REMOVED CAN
EXPOSE YOU TO MOVING PARTS 

AND CAN 

RESULT IN

SERIOUS INJURY.

NEVER OPERATE

 THE 

COMPRESSOR WITH GUARDS

 OR

COVERS WHICH ARE DAMAGED OR REMOVED.

ANY 

REPAIRS

 REQUIRED ON THIS 

PRODUCT SHOULD BE

PERFORMED BY AUTHORIZED SERVICE CENTER PERSON-
NEL.

HAZARD

                                  RISK FROM MOVING PARTS

WHAT CAN HAPPEN

HOW TO PREVENT IT

TOUCHING EXPOSED METAL

 SUCH AS THE COMPRESSOR

HEAD OR OUTLET TUBES,  

CAN RESULT IN SERIOUS BURNS.

NEVER TOUCH ANY EXPOSED METAL PARTS ON COMPRES-
SOR

 DURING OR IMMEDIATELY AFTER OPERATION.

 COM-

PRESSOR WILL REMAIN HOT

 FOR SEVERAL MINUTES AFTER

OPERATION.

DO NOT REACH AROUND PROTECTIVE SHROUDS OR ATTEMPT
MAINTENANCE UNTIL UNIT HAS BEEN ALLOWED TO COOL.

WHAT CAN HAPPEN

HOW TO PREVENT IT

A PORTABLE 

COMPRESSOR CAN FALL

 FROM A TABLE,

WORKBENCH OR ROOF 

CAUSING DAMAGE TO THE COM-

PRESSOR AND COULD RESULT IN SERIOUS INJURY OR
DEATH TO THE OPERATOR.

ALWAYS 

OPERATE COMPRESSOR IN A STABLE SECURE

POSITION

 TO PREVENT ACCIDENTAL MOVEMENT OF THE

UNIT.  

NEVER OPERATE COMPRESSOR ON A ROOF OR

OTHER ELEVATED POSITION.  USE ADDITIONAL AIR HOSE
TO REACH HIGH LOCATIONS.

WHAT CAN HAPPEN

HOW TO PREVENT IT

OIL CAN LEAK OR SPILL

 AND COULD RESULT IN FIRE OR

BREATHING HAZARD, SERIOUS INJURY OR DEATH CAN
RESULT.  OIL LEAKS WILL DAMAGE CARPET, PAINT OR OTHER
SURFACES IN VEHICLES OR TRAILERS.

WHAT CAN HAPPEN

HOW TO PREVENT IT

ALWAYS PLACE COMPRESSOR ON A PROTECTIVE MAT WHEN
TRANSPORTING TO PROTECT AGAINST DAMAGE TO VEHICLE
FROM LEAKS. REMOVE COMPRESSOR FROM VEHICLE
IMMEDIATELY UPON ARRIVAL AT YOUR DESTINATION.

RISK OF PROPERTY DAMAGE WHEN TRANSPORTING

COMPRESSOR

(Fire, Inhalation, Damage to Vehicle Surfaces)

                 RISK OF BURNS

ESW-99 — 9/26/99

                RISK OF FALLING

Summary of Contents for D22073













Reviews: