© 2013 Finishing Brands UK Ltd.
3
EC Declaration of Conformity
We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spray gun model
ADVANCE HD
declare, under our sole responsibility, that
the equipment to which this document relates is in conformity with the following standards or
other normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the
protection requirements of Council Directive 98/37/EEC relating to Machinery Safety Directive,
and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective
Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
This product also complies with the requirements of the EPA guidelines, PG6/34. Transfer
efficiency certificates are available on request.
D. Smith
, General Manager
18th January 2013
Finishing Brands UK Limited reserves the right to modify equipment specification without prior notice.
Part Numbers
The ordering code for the
Advance HD
Spray gun is;
e.g. ADV-S510-13 where;
S
=
Suction or P for pressure
510 =
510 Aircap
13
=
1.3 Nozzle
See chart 1 & 2 p14 for available Aircap/Nozzle sizes
Operational Description
This
Advance HD
Spray Gun is a professional quality gun designed with both high volume, low
pressure (HVLP) technology or EPA compliant, Trans-Tech
®
technology. The ADVANCE HD is
suitable for a wide range of paints, dyes, stains, glazes and lacquers.
IMPORTANT
: These Sprayguns are suitable for use with both waterbased and solvent based
coating materials. These guns are not designed for use with highly corrosive and/or abrasive
materials and if used with such materials it must be expected that the need for cleaning and/or
replacement of parts will be increased. If there is any doubt regarding the suitability of a specific
material, contact your DeVilbiss Distributor or DeVilbiss direct.
NOTE: This gun is not to be used with halogenated hydrocarbon solvents or cleaning agents
such as 1,1,1,-Trichloroethane or methylene chloride. These solvents can react with the
aluminium components used in this gun and cup. The reaction can become violent and lead to
an equipment explosion.
