BT-Pusher PRO+ User Guide
Page 7 of 17
2.
Installation
2.1
BT-Pusher Pro+
interface specification
z
LED
：
Indicate the working status of the
BT-Pusher PRO+
device
z
POWER INPUT
：
DC 12V 1A power adapter
z
USB INTERFACE
：
Used to connect flash disk for offline management. Please use
BtspConfig software to modify corresponding parameters or update file
contents and make sure to save the results to a flash disk,then insert the flash
disk into the relevant BT-Pusher Device’s USB interface, the system will
automatically set the device parameters, update file contents and download log
file, modify blacklist and so on. (After you insert a flash disk,please make sure
LED show a status described in section 2.2.2)
z
NETWORK INTERFACE
：
Used to connect network, through the
BtManagerServer software real-time modify
BT-Pusher
device’s parameter
settings, update file content, blacklist and download send logs file and so on.
USB INTERFACE
POWER INPUT
NETWORK
INTERFACE
LED STATUS INDICATION
Antenna
