User Guide
5
TS 500
2.3.2 Minimum Temperature
How to set the minimum floor temperature above the specified lower level.
2.3.3 Maximum Temperature
Repeat steps 1 and 2 from 2.3.2. Once at Step 3 select
Max. Temperature
.
2.3.4 Floor Limitation
This menu item will appear only if Air/Floor is selected as a control type. From this section, you will
be able to setup the maximum temperature of the floor.
How to set up the floor limitation
2.3.5 Temperature Regulation
The TS 500 comes with two different temperature regulations: PID and Hysteresis. In essence, the
thermostat is programmed to follow certain rules to decide when the heating is turned on and off. We
recommend selecting PID for a quick heating system (i.e. electric heating mats or in-screed electric
floor heating) and hysteresis for slower heating systems (i.e. in-slab hydronic floor heating).
How to set up the temperature regulation
1
Touch the ther-
mostat display to
activate it, then
press
Menu.
2
Press Installation
then
Manual
Setup.
Installation
About
Setup Wizard
Manual Setup
Software
Setup
Control Type
Air Sensor
5.0º
50.0º
PID
Min.Temperature
Max. Temperature
Temperature regulation
3
Press
Min.
Temperature.
4
Use arrows up and
down to adjust
temperature.
5
To return to
the home page
press .
Setup
Control Type
Air / Floor
5.0º
50.0º
27.0º
Min.Temperature
Max. Temperature
Floor Limitation
5
To return to the home page press .
1
Touch the thermostat display to
activate it, then press
Menu.
3
Press
Floor Limitation.
2
Press
Installation
then
Manual
Setup.
4
Setup the desired floor limitation by
using the arrows. Please note that
27ºC is the recommended floor lim
-
itation for timber floor board, and
40ºC is the recommended limitation
for ceiling foil.
Setup
Control Type
Air Sensor
5.0º
50.0º
PID
Min.Temperature
Max. Temperature
Temperature regulation
Tº Regulation
PID
Hysteresis
OK
Cancel
4
Choose your
desired
T°
Regulation
,
then press
OK.
3
Press
Temperature
regulation.
5
To return to
the home page
press .
1
Touch the thermostat
display to activate it,
then press
Menu.
2
Press Installation then
Manual Setup.
