manualshive.com logo in svg

Develop ineo 164, User Manual

Share
Download
Develop ineo 164 User Manual Download Page 101

ineo 164

10-3

10.1

Paper

10

10

Maintenance

10.1

Paper

10.1.1

Checking the paper

Replenishment message

If a paper tray has run out of paper during printing, the message [PAPER EMPTY LOAD PAPER] appears. 
Check the paper tray, then load paper in the paper tray.

Precautions regarding the use of paper

Do not use the following types of paper. Not observing these precautions may lead to reduced print quality, 
a paper jam or a damage to the machine.

-

Paper that has been printed on with a heat-transfer printer or an inkjet printer

-

Folded, curled, wrinkled, or torn paper

-

Paper that has been left unwrapped for a long period of time

-

Damp paper, perforated paper, or paper with punched holes

-

Extremely smooth or extremely rough paper, or paper with an uneven surface

-

Paper that has been treated, such as carbon-backed, heat-sensitive or pressure-sensitive paper

-

Paper that has been decorated with foil or embossing

-

Paper of a non-standard shape (paper that is not rectangular)

-

Paper that is bound with glue, staples or paper clips

-

Paper with labels attached

-

Paper with ribbons, hooks, buttons, etc., attached

-

OHP transparency

Paper storage

Store paper in a cool, dark location with little humidity. If the paper becomes damp, a paper jam may occur. 
Store the paper flat, not on its edge. Curled paper may cause a paper jam.

Summary of Contents for ineo 164











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands