ElectroVap MC
Safety information
Important
This section should be read carefully to ensure the safe and correct installation of your humidifier
.
GENERAL
This manual contains all details necessary for the planning and installation of the ElectroVap MC
humidifier. In addition commissioning and maintenance details are included.
The manual is intended for use by engineers and properly trained technical personnel. Maintenance,
servicing or repair work must only be carried out by suitable skilled and qualified personnel, the
customer must be responsible for ensuring their suitability.
Any risks or hazards, especially when working from ladders or towers should be identified by a skilled
and Health and Safety representative and effective control measure put in place.
No liability will attach to the Distributor if any damage, injury or accident is attributable to inattentive,
inappropriate, negligent or incorrect operation of the machinery whether or not caused deliberately.
Always isolate all electrical and water supplied before commencing any maintenance.
Every effort has been made to ensure details contained in this manual are correct, however, in view of
the wide range of conditions experienced in air handling systems, the information provided should only
be used as a guide. Please contact your Agent if any doubt.
CORRECT USE
ElectroVap MC humidifiers are ONLY intended for use with air handling systems or direct air
humidification. ANY OTHER APPLICATION IS NOT CONSIDERED USE FOR THE INTENDED
PURPOSE. THE MANUFACTURER CANNOT BE MADE LIABLE FOR ANY DAMAGE RESULTING
FROM INCORRECT USE.
WATER
ElectroVap MC humidifiers are designed to be used with mains, demineralized R/O or softened water.
On no account attempt to introduce any other fluid or chemical into the system. Water supply should
not exceed 6.0 bar and installation should comply with local regulations.
ELECTRICITY
All work concerned with electrical installation MUST only be performed by skilled and qualified
technical personnel (eg electrician or technicians with appropriate training). The customer MUST be
responsible for ensuring their suitability.
It is the duty of the installer to ensure that suitable sized cables and MCB protection is provided.
Please observe the local regulations concerning the provision of electrical installations.
WARRANTY
Failure to specify and fit original parts and accessories will invalidate your warranty.
NOTE
Our policy is one of continuous research and development. We therefore reserve the right to amend
without notice the specifications given in this document.
2
