2
Instructions for use
x
Maximum permissible water pressure in Pascal : 0,5MPa
**Caution**
x
If the mains cord is damaged, it must be replaced by the manufacturer or a similarly qualified personne in or-
der to avoid a hazard.
x
Unplug device before any handling .
**Water connection**
Place the unit on a level surface, such as a benchtop or floor. In an environnment with little to no ventilation,
place the unit in a central position. In a ventilated area, place unit near the intake end. Then, connect a water supply
to a 6mm female inlet.
**Power connection**
Plug the unit directly into an electrical outlet for evaluation. Listen for a smooth, quiet operation. Motor shaft
should be centered and vertical. Make any necessary adjustments. After evaluation, connect AC4 to desired control
device as you see options below;
x
Connect a humidistat for better control
x
Connect a timer if the device is to be used from time to time.
Connection example