manualshive.com logo in svg

Devantech ESP32LR20, User Manual, Page: 6 / 15

Share
Download
Devantech ESP32LR20 User Manual Download Page 6

ESP32LR20

                                                              User Manual v1.02

PD Sets the Primary DNS. 

The can be the IP address of your router which will then use your ISP provided DNS. 
You can also specify the DNS such as 8.8.8.8 for Googles DNS server.

PD “192.168.0.1”

OK. Saved Primary DNS: 192.168.0.1

SD Sets the Secondary DNS. 

The can be the IP address of your router which will then use your ISP provided DNS. 
You can also specify the DNS such as 8.8.4.4 for Googles DNS server.

SD “8.8.4.4”

OK. Saved Secondary DNS: 8.8.4.4

SS This sets the SSID. 

The SSID is the public name of your WIFI network Enter your WIFI’s SSID here.

SS “Devantech”
OK. Saved SSID: Devantech

PW Sets your networks WIFI password.

PW "K]~kCZUV*UGA6SG~"
OK. Saved Password: K]~kCZUV*UGA6SG~

PA Sets the TCP/IP port number for the ASCII commands.

PA 17126
OK. Saved ASCII port number: 17126

Copyright 

© 2018,

 Devantech Ltd.

All rights reserved.

www.robot-electronics.co.uk

6

Summary of Contents for ESP32LR20
















Reviews:

No comments