65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56/820027, Fax: +359 56/836700
E-mail: [email protected]
Web: www.devabroadcast.com
- 25 -
E-MAIL NOTIFICATIONS
DB8000 has built-in E-mail Client to perform an e-mail notifications in case of Input Signal
source change. E-mails are sent to predefined recipient and consist of short text describing source
change - Main, Aux or Backup. E-mail Client could be enabled or disabled at any time. Before
using E-mail Client, one must be configured properly, according to used E-mail Server. E-mail
Client could establish SSL connection if required.
Configuration of the E-mail Client can be accomplished following the next steps:
1. While in the Main Menu press the
OK
button;
2. Press the
DOWN
key and select Sub-menu
8.E-mail Client Settings
.
3. Press the
OK
button. The
DOWN
key can be used to navigate through this Sub-menu which
looks like below:
4. Using
UP
or
DOWN
keys move the cursor and select the parameter to be edited;
5. Press the
OK
button once again to enter the sub menu or the editing field will start blinking.
Values that are needed can be selected by
UP
or
DOWN
keys. To move between the parameter’s
fields use
LEFT
or
RIGHT
keys;
6. Press the
OK
button to confirm selection;
7. Press the
LEFT
key to exit to the Sub-menu or keep it pressed for more than 2 seconds to
exit to the Main Menu;
Sub-menu for E-mail Client Account Settings looks like below:
Sub-menu for E-mail Recipient Address looks like below:
Sub-menu for Device ID looks like below:
Device ID is included into notification text and has meaning only to distinguish messages from
one device to another.
