There are two options
for
access to the WEB Interface of DB
64-FM
. The first one is
through
manual
identification of the IP address of the device, and the second one is t
h
rough
the
Network discovery option
(
For Windows 7 users only
)
.
Manual IP Address Identification
STEP 3.1
1.
Connect the device to a local network or to the Internet
by the applied LAN cable.
Through
the Front panel
navigational menu
pressing the “OK” button you will
enable you to
enter the device main menu
;
2.
Using the “Right” navigational button find the “Status”
section
located
at the end of the Menu
;
3. P
ress the “OK” Button to enter the “Status Section” .
Via
the Front panel navigational menu press the
“DOWN” button.This operation will
visualize
the
screen containing information about the IP Address of
the device
;
4.
Open a new WEB Browser and enter the device IP
address in the address field then press “Enter”
;
5.
A window
that
requir
es
username and password will
appear. Default values being -
Username: user or
admin, Password: pass
.
NOTE:
Due to the inability of some WEB Browsers to read the IP address format displayed on the screen
of the device, the numbers included in the IP Address must be written without the leading zeros.
For example:
192.168.020.068
must be written as
192.168.20.68
WEB Interface Access
STEP 3
Digital Program
STEP 2.2
DB6
4
-
FM
is fed with AES/EBU digital audio. The
main program output is sent to the DB6
4-FM
Audio
Processor via XLR Connection. The MPX
composite output is sent via BNC connection to the
transmitter MPX input. The audio processor output
is MPX OUT -1.
DB64-FM – Broadcast Audio Processor
RF Power out for Antenna
MPX IN
FM Transmitter
MPX OUT -1
Once the connection process is
completed, connect the AC
power to the unit. Then, using
the front panel menu, navigate
to
Input > Input Select >
and
set
Main Digital
input as
appropriate for your installation.
Control Room
ON AIR
BROADCAST CONSOLE
Program Output
Digital AES/EBU
Digital Input
