65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 62 -
Sound impact
– As explained, this option keeps the original authenticity of the sound attacks
(peaks). Pay attention when using the
Sound Impact
with value bigger than 6dB, as the average
power of the sound will be significantly increased. In such cases, you may need to lower the band
limiter or final limiter drive.
Drive
– it is intended to create more or less gain at the input of the band. When setting the drive,
note that:
•
Increasing the drive will lead to reduction in the gain created by the band process. This will
make up for the very low levels.
•
A very low drive will prevent low level corrections’
•
If you are not using the wide band AGC, we recommend the drive to the bands to be pushed,
so that the reduction to be sufficient and correct low levels.
Threshold
– sets working limits for each band. It can also move bands from the background to
foreground and vice versa.
Attack
– Adjust in dB per second to set the processors’ reaction speed for each band. When
setting the attack parameter bear in mind that:
•
If lower value is set, the slower will the processor react.;
•
If higher the value is set, the faster the processor react, thus controlling the rapid variations.
Release
– is often associated with density. Indeed, the higher the release time is, the higher the
spectrum density within the band will be. When setting this parameter, bear in mind that the Band
processor is very powerful. Therefore, it is not necessary high release time to be set in order for
high density levels to be obtained.
