65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 38 -
Scope Page
Select
Scope icon
from
Menu page
and short press
OK
button on it. The transition to
Scope
page
will be made.
Scope mode
is used to visualize the most important signals participating in the
process of demodulating and stereo decoding. This mode represents the observed signal change
over time. In order to maximize the plot area, the
Header
and
Soft buttons
labels are hidden.
The data from last selected
Scope source signal
since DB4005 power-up will be shown on the
display.
Scope with RDS selected as signal source
The display appearance and control states of
Scope page
are identical to the controls states of
Bandscan page
(see
“Span control state” on page 32
“Marker control state” on page 34
). The
X Span
,
Y Span
,
Center Frequency
,
Y Reference
and
Markers
can be changed in similar way. Each signal source has dedicated set of
X Span
,
Y Span
,
Center
Frequency
and
Y Reference
setting.
Available parameters in scope page:
– Determine the
source signal
for scope plot. Possible
sources are –
RF
,
MPX
,
Left
,
Right
,
Pilot
,
RDS
,
Sub
and
Main
. The name of the selected
signal
source
is overlayed at right bottom corner of the data plot.
– Select active
antenna input
or
MPX input
of DB4005.
– Sets the
frequency
at which the DB4005 is tuned.
