User Manual DEV 5072
Copyright DEV Systemtechnik GmbH 2016-2017
53
5.5.4.3.1
.application.controlMode
OID:
.1.3.6.1.4.1.21035.34.2.1
.0
Syntax:
INTEGER {local (1), remote (2), auto (3)}
Access:
read-write OR read-only
Description:
The device operation mode (chapter 5.1), possible values:
"
1
" Local Mode: local operation via Web I/F
"
2
" Remote Mode: remote operation via SNMP
Note:
The value "
3
" (auto) is not supported by this type of device.
Via the SNMP setup of the Web Interface (please refer to chapter 5.4.6.2.2)
.controlMode can be set to read-write (default) or to read-only.
The factory setting is "
2
" (Remote Mode).
5.5.4.3.2
.application.outputVoltage
OID:
.1.3.6.1.4.1.21035.34.2.2
.0
Syntax:
INTEGER32
Access:
read-only
Description:
The effective output voltage, i.e. the average calculated from the
measured voltages from all installed power modules in [mV].
Example:
"
47680
", i.e. 47.680 V
5.5.4.3.3
.application.outputCurrent
OID:
.1.3.6.1.4.1.21035.34.2.3
.0
Syntax:
INTEGER32
Access:
read-only
Description:
The calculated cumulative output current in [mA].
Example:
"
108233
", i.e. 108.233 A
5.5.4.3.4
.application.numberOfChannels
OID:
.1.3.6.1.4.1.21035.34.2.4
.0
Syntax:
INTEGER32
Access:
read-only
Description:
The number of power supply module slots.
For this type of device, "
4
" is returned.
Note:
This value is used to determine the maximum index of the following table:
5.5.4.3.5
.application.channelTable
The .channelTable describes the special features and settings of each power supply
module (slot).
5.5.4.3.5.1
.application.channelTable.channelEntry.channelIndex
OID:
.1.3.6.1.4.1.21035.34.2.5.1.1
.x
Syntax:
INTEGER32 (1..8)
Access:
not-accessible
Description:
A unique value for each table entry ranging between "
1
" and the
number of entries (defined by .numberOfChannels, please refer to
chapter 5.5.4.3.4)
