Deutz TCD 2013 2V, Workshop Manual

Page: 65 / 471

© 02/2010 OBJ_DOKU-21746-001.fm
2/4
6
Front cover
TCD 2013 2V W 01-02-02
● Join the impact sleeve (1) and the shaft sleeve (2).
● Place the shaft sleeve with impact sleeve centrally on
the crankshaft with the collar (3) facing the crank
-
shaft.
Attention!
Do not damage the peripheral surfaces
and the sealing surfaces.
© 39872-0
● Knock the shaft sleeve onto the crankshaft up to the
stop by hitting the impact sleeve (1) lightly in the cen
-
tre.
● Knock on the shaft sleeve evenly all round.
The installation depth of the shaft sleeve is
determined by the impact sleeve.
The shaft sleeve must cover the running
marks.
© 39891-0
● Oil the crankshaft journal lightly.
● Install a new crankshaft sealing ring.

W 01-02-01
After installing the shaft sleeve, check that
there is no burr on the surface of the
crankshaft.
To avoid dust and dirt deposits, do not wet
the crankshaft sealing ring and fleece ring
with lubricating oil.
The manufaturer has already coated the
sealing lip with a lubricating wax.
© 39875-0