Deutz TBD 616 OEM, Operating Instructions Manual

Page: 226 / 257

Page Page 2
300201136-en-00.fm © 0303
B 11-6-1 Dieselmotoren
Below the steps for reading out the first fault flashing code:
Steps for reading out the next fault code:
The steps can be repeated until the last saved fault code is output. Then the first fault is output again.
Figure 1 Read out fault flashing codes
a The fault lamp signals an error, i.e. it flashes or lights steadily.
●
Press diagnosis key 1 to 3 s:
Flashing light or steady light of the fault lamp goes out.
b After 2 s:
Detection of the EMR2 (2x short flash)
●
Output of the flashing sequence of the first saved fault
(Example: fault number 01, ”speed sensor 1”):
c After 2 s: 1x long
d After 2 s: 1x short
●
After fault code output:
e 5 s pause, then display of flashing or steady light.
a The fault lamp signals an error, i.e. it flashes or lights steadily.
●
Press diagnosis key 1 to 3 s:
Flashing light or steady light of the fault lamp goes out
b After 2 s:
Detection of the EMR2 (2x short flash)
●
The next flashing code is output ( c , d )
●
After fault code output
e 5 s pause, then display of flashing or steady light.
On
Off
Time
1 - 3 s
Diagnosis key
Fault lamp
On
Off
Tim
2 s
2 s
2 s
0,8 s 0,8 s
0,
4 s
0,
4
s
5 s
“ 2 ” “ 1 ” “ 1 ”
a b c d e