21.4.11
UNIGATE fieldbus gateway for Fast Ethernet V. 2.1
37
Deutschmann Automation GmbH & Co. KG
Commissioning guide
13 Commissioning guide
13.1 Note
Only trained personnel following the safety regulations may commission the UNIGATE.
13.2 Components
You will require the following components to commission the UNIGATE:
•
UNIGATE
•
Connection cable from gateway to the process
•
Connector for the Ethernet connection to the gateway
•
Ethernet cable (this cable is generally available on site!)
•
10.8..30 V DC power supply (DIN 19240)
•
Enclosed CD containing instruction manual
13.3 Installation
The UNIGATE-Ethernet-TCP/IP module features enclosure IP 20 and is thus suitable for switch
cabinet use. The device is designed for snapping onto a 35 mm top-hat rail.
13.4 Dimensional drawing DIN-rail mounting
13.5 Commissioning
It is essential that you perform the following steps during commissioning in order to ensure that
the module operates correctly:
13.6 Ethernet connection
Connect the device to the Ethernet network at the interface labelled "10/100 BaseT".
13.7 Connection of the process device
Please also read the user manual provided for the process device when commissioning the pro-
cess device.
