manualshive.com logo in svg

DEUTSCHMANN AUTOMATION UNIGATE RS232/422, Instruction Manual

Share
Download
DEUTSCHMANN AUTOMATION UNIGATE RS232/422 Instruction Manual Download Page 33

29.4.11

UNIGATE fieldbus gateway for ProfibusDP V. 4.7

33

Deutschmann Automation GmbH & Co. KG

Hardware ports, switches and LEDs

11.1.2

Model UNIGATE RS / SC 232/422-ProfibusDP

11.2  Configuration of the UNIGATE RS

The gateway is delivered by the manufacturer with the following configuration 
- Transparent data transmission (i.e. Layer 7 is transferred unchanged).
The configuration of the gateway can be changed by the customer. That is what the software 
WINGATE

®

 that comes along with the gateway is meant for.

For the configuration the gateway has to be brought to the configuration mode. For that reason 
the switches S4 and S5 have to be set to the position "F" each and the interface-switch has to be 
set to "232". Consequently a connection to the PC has to be established and the gateway has to 
be started once more. The program WINGATE

®

 automatically selects the interface parameters 

correctly. For the operation of WINGATE

®

 please take a look at the WINGATE

®

 Online help.

11.3  Configuration of the UNIGATE SC

UNIGATE SC is delivered with an empty script.
For the configuration see the following sketch:

Summary of Contents for UNIGATE RS232/422




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands