Hardware ports, switches and LEDs PROFINET
Deutschmann Automation GmbH & Co. KG
36
Fieldbus-Gateway UNIGATE
®
CX EtherNet/IP - C4Map . 1.0
29.9.20
12.2.8 LEDs 1 / 2 / 4 / 8 (Error No / Select ID)
If these 4 LEDs flash and LED “State“ simultaneously lights red, the error number is displayed in
binary notation (conversion table, see Annex) in accordance with the table in chapter "Error
handling". Additionally these LEDs are controllable via Script:
12.3 Switches
The Gateway features 2 switches with the following functions:
Rotary coding switch S4
ID High for serial interface i. e. configmode
Rotary coding switch S5
ID Low for serial interface i. e. configmode
12.3.1 Rotary coding switches S4 + S5 (serial interface)
These two switches can be read out through the Script command "
Get
(RS_Switch,
Destination)
" and the value can be used for further functions. This value is read in when the
Gateway is switched on or always after a Script command has been executed. The switch
positions "EE" (testmode) and "FF" (config mode) are not possible for RS422- or RS485-
operation.
Note:
The switch position "DD" (ie, S4 and S5 in position "D") is reserved for internal purposes.
12.4 The Debug cable for UNIGATE
®
CL
As accessory a pre-configured Debug cable is available. The Debug cable connects the Gate-
way to Debug and RS.
Summary of Contents for UNIGATE CX-EtherNet/IP 2Port CANopen
Page 2: ...Manual Art No V4420E...
Page 56: ......
