(See illustration on back cover)
1
Adjust the
carry system
1.1
Loosen all straps. Load the child carrier with
realistic weight and shoulder the Kid Comfort.
1.2
Position the hip belt on the hip bones
and tighten.
1.3
Now tighten the shoulder straps, but make
sure the main weight remains on the hip belt.
1.4
The perfect position: the shoulder straps’
anchor points rest between the shoulder blades.
For precise adjustment lower or raise the shoul
der straps with the VariFit system:
1.5
Unfold cover pad.
1.6
a)
To shorten the back length tighten the
orange belt strap
b)
to raise the length loosen
the orange belt strap and readjust straps. For
a perfect position tension the band tightly. Put
cover pad back into position.
1.7
Now adjust the angle of the stabiliser
straps: for back length SM thread lower, for
ML upper buckles. Tighten the stabiliser straps
on the shoulder straps and hip belt to ensure a
compact fit. This guarantees extra stability on
difficult terrain. For more ventilation loosen the
stabiliser straps.
After adjusting the carry system to the individual
back length, take off the child carrier and con
tinue with the adjustment of the height of the
child seat.
2
Adjust the height of
the child seat
2.1
Place the child carrier on the ground be
fore adjusting. Loosen the straps on the side and
open the side entry. Loosen and open the 5point
safety harness.
2.2
To completely lower the child seat lift
the chin pad and raise the buckle for the seat’s
height adjustment. Push the seat down.
2.3
Stand behind the child carrier to check
whether it stands stable. During the following
steps always secure a safe stand by putting one
foot on the kickstand.
2.4
Lift the child into the carrier or ask the
child to enter the carrier him/herself via the side
entry. Put on the shoulder straps of the 5point
safety harness and close the chest strap.
2.5
To raise the seat into the ideal position
pull the adjustment strap until the child’s chin is
on level of the buckle for the seat height adjust
ment. Slip one hand below the seat to support
the adjustment.
USING
