8
9
w w w. De u b a 2 4 o n l i n e . d e
w w w. D e u b a 2 4 o n l i n e . d e
Check if all screws and bolts are driven in tightly
and control this regularly. For cleaning use a
sponge and warm soapy water. Don´t use any
solvent-containing cleaner or detergents as for
instance bleach can damage the product.
When the product is completely set up, check
if all screws and bolts are driven in tightly and
control this regularly.
Make sure that this product is completely
assembled as indicated on the illustration before
usage.
The wicker products are designed for a usage with
suitable seat pads or cushions. If using without
seat pads or cushions damages can occur.
DONT’S
Don´t use any electronic tools to set up these
products. The high energy of these electronic
tools causes screws to overtighten and therefore
they won´t grid.
Don´t overtighten screws or bolts. Only
tighten the screws entirely after the product
is completely set up. You shouldn´t sit or stand
on the tables. Don´t use this product if parts
are missing, damaged or worn down. Never use
abrasive cleaner or chemical detergents.
Independent of an additionally applied wood-
surface-treatment, we suggest to NOT have the
product standing on grass or lose ground. To
avoid it to bog down in the ground or to damp,
you should place the product on a suitable, firm
ground (for example washed concrete flags or
pavement).
By all means, make sure that constructions for
foundation (if any) are sufficiently stable in order
to avoid a risk of an accident or of falling.
In times of freeze and over the winter, we suggest
you to store the products in a covered dry place.
C A R E I N S T R U C T I O N S
Natural products made of wood have to be
lubricated in order to withstand the weather
outdoors. The natural resistive attributes of
tropical hardwoods (as well as those of your
new garden furniture) alone are not enough to
provide sufficient protection. At least 2x a year
your garden furniture has to be lubricated or else
you will expose it to the natural decay caused by
the weather.
This natural product will change its color due to
wind and weather; the wood discolors and turns
grey. Natural cracks can form – the practical value
and the resistance aren´t affected though. As long
as you will handle it attentive and implement the
care instructions as followed, you will delay the
process and will be able to take much pleasure in
your new furniture.
Approach:
Make sure that all wood parts will be rinsed with
lukewarm water and slightly soapy water (dish
detergent or similar) before they are assembled,
in order to remove wood dust or potential
existing oil or pretreatment residues. Please wipe
dry, set up and let it dry for 1 day. Before you will
lubricate it later again please apply a smooth sand
paper and clean as described before. Afterwards
apply hardwood oil or teak oil – please apply the
natural oil sparingly with a kitchen sponge – wait
20 minutes before thoroughly rubbing off the
remaining oil. Please wipe again with a lint-free
cloth.
Before using, check if the wood stains and all oil
residues have been removed successfully.
You will achieve optimal results if you protect
the furniture additionally with a protective cover
against weather impacts such as rain, spores,
dust and so on.
Hardwood furniture should not be standing in
the rain permanently. If you have purchased oil
with pigments, it can possibly happen that the
pigments will be washed out of the protective oil.
We are not liable for any consequences such as
soiled terraces or tiles.
Don´t place the wooden furniture directly on the
lawn. The moisture from soil and grass can cause
mold formation or similar and damage your
furniture regardless of the lubrication.
This will happen with each lath a maximum of
one time and is no reason for concerns.
Advice:
In case you have purchased seat pads
or cushions with this product, please note that
the water-repellent coating (not waterproof)
will be washed out of the fabric in the process
of washing. Your local laundry shop will be able
to advise you about the possibilities of a follow-
impregnation.
Tip for stain removal:
Avoid washing by machine!
First try to wash out the stain on the spot with
lukewarm soapy water (without aggressive
detergents). Don´t use any hard brushes which
scratch the water-repellent protective layer of
the cushion or pad.
