Air-to-water Heat Pump Split Versati
65
SPLIT TYPE
4.4.2 Space requirements for installation
Unit: mm (inch)
＞
50
0(19
-11/1
6)
＞
2000
(78-3
/4)
＞
2000 (78-3/4)
＞
10
00 (39
-3/8
)
＞
500(19-11/16)
＞
500(19-11/16)
＞
500(19-11/16)
4
.
4
.
3 Precautions on installation of outdoor unit
(1) When moving the outdoor unit, it is necessary to adopt 2 pieces of long enough rope to hand the unit from
4 directions. Included angle between the rope when hanging and moving must be 40° below to prevent
center of the unit from moving.
(2) Adopt M12 bolts components to tighten feet and under frame when installing.
(3) The outdoor unit should be installed on concrete base that is 10cm height.
(4)
Requirements on installation space dimension of unit’s bodies are shown in following drawing.
(5)
The outdoor unit must be lifted by using designated lifting hole. Take care to protect the unit during lift. To
avoid rusting, do not knock the metal parts.
4.5 Installation of Indoor Unit
4.5.1 Install process of indoor unit
Step1:Drilling hole on the wall in the following draw.
Unit: mm (inch)
500 (19-11/16)
463 (18-1/4)
900 (35-7
/16)
825 (32-1/2)
Unit outline
Expansion bolt hole
