Air-to-water Heat Pump Split Versati
54
SPLIT TYPE
No.
Full Name
Displayed Name
10
Remote room temperature
T-remote room
11
Solor kit-entering water temp
T-SL water I
12
Solor kit-leaving water temp
T-SL water O
13
Solar panel temp
T-SL panel
14
Discharge pressure
Dis.pressure
15
Reserved
Reserved
16
Reserved
Reserved
17
Target temperature for Weather-dependent Mode
T-auto mode
18
Target temperature for floor debug
T-floor debug
19
Time period for floor debug
Debug time
20
T-liquid
T-liquid
21
T-RGP
T-RGP
22
Swimming pool-water temp (invalid)
T-Swimming (invalid)
23
Swimming pool-entering water temp (invalid)
T-Swimming in (invalid)
24
Swimming pool-leaving water temp (invalid)
T-Swimming out (invalid)
3.2.4.3 Error View
At the error view pages, the user is enabled to see which error the unit suffers.
[Operation Instructions]
(1) At the
VIEW
page, select
Error
and then press the OK key
to go to the
ERROR
page.
(2) At the
Error View
page, it is able to view each error.
[Notes]
(a)
The real-time error will show on the control. Taking Error 2 in the above figure for example, when it is
recovered, it will disappear and be replaced by Error 3, and other errors follow the same way.
(b) If the total no. of errors exceed six, other errors should be viewed by switching pages through “
Last
”
and “
Next
”
.
(c) Any one among “
IDU auxiliary heater 1 error
”, “
IDU auxiliary heater 2 error
”, “
Water tank
heater error
”
occurs, the control will beep until this error has been cleared.
(d) As some functions are available for the unit, therefore error codes for these functions are also unavailable,
like swimming pool heating function.
See the following table for error description.
