GAVIN-6C Instruction Manual
- 32 -
1. In the
Mix Set
setting interface, press
UP
or
DOWN
key to select
Flaperon
Mix
, and then press
ENT
key to enter the setting interface.
Flaperon Mix
1/1
1.
Mix SW
：
OFF
2. Modify the value of
Mix SW
to
ON
by pressing
R/+
key, to activate Flaperon
mixing function.
The setting interface is shown in the following figure.
1/5
1.
Mix SW
：
ON
2.
AIL
3.
AIL
100
-100
AIL
：
FLP
：
Flaperon Mix
3. Press
UP
or
DOWN
key to select the setting item, and then press
R/+
or
L/-
key to set the value of the item.
AIL
▶
AIL
: This parameter is used to set the mixing rate (percentage) from
aileron channel to itself. Values: -100~100. If the value is negative, it will
adjust the aileron operation in the negative direction. If the value is positive, it
will adjust the aileron operation in the positive direction. The default is
100
.
AIL
▶
FLP
: This parameter is used to set the mixing rate (percentage) from
aileron channel to flap channel. Values: -100~100. If the value is negative, it
will adjust the flap operation in the negative direction. If the value is positive, it
will adjust the flap operation in the positive direction. The default is
-100
.
FLP
▶
AIL
: This parameter is used to set the mixing rate (percentage) from flap
channel to aileron channel. Values: -100~100. If the value is negative, it will
adjust the aileron operation in the negative direction. If the value is positive, it
