• Upper limit for Continuous Run Heat Mode
• Lower limit for Continuous Run Cool Mode
• Configuration of the minimum comfort zone
• Configuration of the minimum Cool Mode temperature limit
• Configuration of the maximum Heat Mode temperature limit
• Password modification
Password Entry
The password is displayed in two segments. The first segment is “XX”, and the
second segment is “--XX”. All four values must be correct to enter the protected
menu.
To enter the password :
NOTE:
This screen is only displayed for two seconds if no buttons are
pressed. The correct password must be entered quickly.
1. Press
until the
icon is displayed. The first digit will flash.
2. Use
or
to enter the first digit.
3. Press
and the second digit will flash.
4. Use
or
to enter the second digit.
5. Press
and the "-" icon displays with the third digit.
6. Use
or
to enter the third digit.
7. Press
and the fourth digit will flash.
8. Use
or
to enter the fourth digit.
9. Press
and the password will be compared to the one in memory.
If the wrong password is entered or no buttons are pressed in two seconds, the
display will return to the Main Display (vehicle interior temperature).
NOTICE:
DDC Technical Service must be contacted for the backdoor
password. You must have ready the password code that is flashed when
the wrong password is entered, when contacting technical service.
OPERATING INFORMATION
20
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION
DDC-SVC-MAN-0019
