14.5 Fuel Prefilter Element Cleaning
Clean the fuel prefilter element as follows:
1.
Open the fuel filler cap to release pressure in the fuel system. Replace and tighten the cap.
2.
Clean the outside of the prefilter housing. Keep fuel away from hoses or pipes located beneath the filter
Figure 4. Cylinder Head Cover
Figure 5. Fuel Filters
3.
Unscrew the cap on the fuel prefilter. Pull the cap and filter element out of the prefilter housing.
4.
Clean the cap and the filter element. If the filter element is heavily soiled or damaged, replace it.
5.
Check the O-ring on the cap and replace it if necessary.
6.
Insert the filter element into the prefilter housing and screw the cap onto the housing. Tighten the cap 25 N·m (18
lb·ft ).
EuroV MBE 900 Operators Manual
All information subject to change without notice.
35
DDC-SVC-MAN-0207
Copyright © 2019 DETROIT DIESEL CORPORATION