16
EN
Setting the time (2nd and 3rd time zone)
1. Pull out crown 2 or 3 into the 1st position.
2. Set the time by turning the crowns
3. Push back the crowns into their normal position.
Functions of the chronograph (stop watch)
1. Start the chronograph by pushing button A. The minute hand and
second hand of the chronograph will start to run.
2. Repush button A to stop the chronograph.
3. A push of button B will reset the minute hand and second hand of the
chronograph to the start position.
Calibration (reset) of the Chronograph
This procedure should only be performed if the second hand of the chro-
nograph does not return to the zero position after the chronograph has
been reset or after battery change.
1. Pull out the crown to position 1
2. Push button A to set the second hand of the chronograph to the zero
postion. The minute hand of the chronograph will be synchronised with
the second hand of the chronograph.
By keeping button A pressed you can rapidly advance the second hand
and minute hand of the chronograph.
3. As soon as the hands have been reset to the zero position you may
reset the time and push back the crown in the normal position.
Summary of Contents for TORINO
Page 1: ...DETOMASO TORINO ...
