20
EN
Operating instructions for the chronograph
Setting the date
Caution: Do not set the date between 9 pm and 1 am.
1. Pull out the crown into the 1st position.
2. Set the date by turning the crown clockwise.
3. Push back the crown into the normal position after the date has been
adjusted.
Setting the time
1. Pull out the crown into the 2nd position.
2. Set the time by turning the crown. Please ensure the correct setting of
the 24 h hand.
3. Push back the crown into the normal position after the time has been
adjusted.
Chronograph – simple use of the stop watch
1. Push button A to start the Chrono (stop watch)
2. Repush button A to stop the function. Another push of button A will let
the Chronograph run.
3. Push button B to reset to zero.
(the Chronograph is not supposed to run)
