16
EN
Setting the time
1. Pull the crown out to the 2nd position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the normal position.
Setting the Date
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 3:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
Using the chronograph
This chronograph is able to measure and display time in 1/20 second units
up to maximum of 59min 59sec. The chronograph 1/20 second hand moves
continuously for 30 seconds after starting, and then stops at zero position.
Measuring time with the stopwatch
1. Press button „A“ to start the chronograph.
2. The chronograph can be started and stopped each time button „A“ is
pressed.
3. Press button „B“ to reset the chronograph and chronograph minute and
second hands return to their zero positions.
Summary of Contents for DT2049
Page 1: ...DETOMASO SALSO DT2049 ...
Page 2: ......
