17
EN
Using the chronograph
1. Push button A to start the Chrono (stop watch).
2. Repush button A to stop the function.
3. Push button B to reset to zero.
Calibration (reset) of the Chronograph
(only after battery change or faulty handling)
1. Pull out the crown to position 2.
2. Press button “A” to set the second hand of the chronograph to the zero
position. A short push will give you a step by step advance whereas the hand
can be advanced rapidly by continuously pushing this button.
3. Push the crown back into its normal position. The chronograph has now
been successfully calibrated.
Summary of Contents for DT-W1001
Page 1: ...DETOMASO GRAND PRIX DT W1001 ...
Page 2: ......
