14
EN
Setting the date
1. Pull the crown out into the 1st position.
2. Wind the crown in a clockwise direction.
Important: do not set the date between 9 pm and 12.30 am.
3. Push the crown back into the standard position.
Setting the 2nd time zone (24-hours)
1. Pull the crown out into the 1st position.
2. Press button A and hold it pressed until the hand showing the 2nd time
zone begins to move. Release button A when the hand reaches the
required position.
3. Push the crown back into the standard position.
Setting the alarm time
1. Pull the crown out into the 1st position.
2. Wind the crown in an anti-clockwise direction.
3. Push the crown back into the standard position.
Activating/deactivating the alarm
The alarm is activated or deactivated by pressing button B:
2 acoustic signals = alarm activated
1 acoustic signal = alarm deactivated
The alarm can be set a maximum of 12 hours before the desired alarm
time. When this time is reached an acoustic signal sounds. Press button
B to turn off the signal.
