Dethleffs 2006 Globetrotter XXL, Instruction Manual

Page: 47 / 166

47
Globetrotter XXL - 11-06 - DET-0047-01
EN
Living
7
7.2 External flaps
The external flaps fitted to the vehicle are all fitted with identical locking cylin-
ders. Therefore, all locks can be opened with a single key.
7.2.1 Flap lock with recessed handle
Opening: Insert key into locking cylinder (Fig. 13,1) and turn a quarter turn. The flap
lock is unlatched.
Remove the key.
Pull on the lock handle (Fig. 13,2). The external flap is open.
Swivel the external flap upwards and hold it.
Pull out the lever (Fig. 14,2) and turn it upwards a quarter turn.
Lean the external flap (Fig. 14,1) against the lever.
Closing: Hold the external flap (Fig. 14,1).
Turn the lever (Fig. 14,2) down a quarter turn and push it in.
Firmly close the external flap.
Insert key into locking cylinder and turn a quarter turn. The flap lock is
locked.
Remove the key.
7.2.2 Sliding drawer
Before commencing the journey, close all external flaps and lock them.
To open and close the external flap, open or close all locks that are fitted
to the external flap.
When leaving the vehicle, close all external flaps.
To open the external flap, pull all the lock handles fitted to that particular
external flap at the same time.
Fig. 13 Flap lock with recessed handle Fig. 14 External flap, open
Do not place loads weighing more than 40 kg into the sliding drawer.
Always fasten the boxes with the tension belts before commencing the
journey.