STEP B:
Install device mounting plate
Detex panic device mounting hardware supplied with Detex device.
ECL-230X device gate mounted instructions
(continued from sheet 2)
Strike
1/4-20 x 5/8"
PPH screws
B4:
Use four (4) tek screws
& lockwashers supplied
in device hardware kit to
attach device mount plate
to gate in locations shown
(machine screws &
nuts also supplied)
Device
40" from
floor/ground
B3:
Mark (6)
mounting
plate holes
C
L
B2:
Position template against
adapter plate and align template 40"
from floor/ground
CL
B5:
Install strike
B6:
Install 2 tek screws to secure
strike bracket to gate pole using
2 of the pre-drilled bracket holes.
Strike bracket must be parallel
with gate plate.
Continue exit device installation using instructions supplied with exit device.
1/4-20 x 3/4"
PFH screws
B1:
Install adapter plate kit
(p/n 104345)
If 03GS Box is to be used,
mark these locations as well.
See next page for installation
before proceeding to step B4
104918 sheet 6
