DETAIL A
ALWAYS REMOVE POWER & BATTERY
CONNECTIONS BEFORE SERVICING UNIT
24VAC INPUT 500mA MAX CURRENT
SERVICE BYPASS
NORMAL
see step 5 & DETAIL A
OR OR OR
5 min 10 min 20 min 40 min
MAX BYPASS TIME SETTINGS
DOOR TAMPER SWITCH HAS A SERVICE BYPASS MODE. PULL
SWITCH OUT TO BYPASS DURING UNIT SERVICING & ADJUSTMENT
STATUS INDICATOR
DISABLE AUTO REARM
O
N
O
N
O
N
O
N
O
N
O
N
O
N
O
N
Fig. 3
+/ -
BATTERY
see step 5
CONTROL
BOARD
CABLE
POWER
12V AC
24V AC/DC
DISPLAY
BOARD
CABLE
see step 5
see Detail C
Tamper Switch
Battery
TAMPER
Magswitch
Surface (SK1) and Flush (FK1)
Closed Connection
Door Secure
Magnetic Switch
Flush Mount
MS2049S Option
connections
Magnetic switch
White
Red
(NOT Used)
Black
Magnetic Switch
Surface Mount
DISPLAY BOARD
POWER BOARD
2. MAGNETIC SWITCH INSTALLATION:
Install magnetic contact switch onto door using magnetic switch instructions. For wire requirements, see Manufacture's
Recommendation Chart. Route wires to Exit Alarm location.
Magnetic Contact Switch:
Within 6 feet: 2 conductor cable, 22AWG
20 feet or less: Twisted wire, 20AWG
50 feet or less: Twisted wire, 18AWG
3. TRANSFORMER INSTALLATION
:
Connect power wires to the two terminals on the 12VAC to 24VAC transformer. Route wires to Exit Alarm location per applicable
building code(s).
DO NOT APPLY POWER AT THIS TIME.
Power Leads from Transformer to Exit Alarm:
20 feet or less: 20AWG
50 feet or less: 18AWG
(MAGNETIC SWITCH may be sold separately)
103140 Page 3
