104885 Page 12
Backplate
BP10 or BP12
STEP 8:
SECURE ROD / LATCH / CENTERLIFT ASSEMBLY TO DOOR
8d
(VIEWED FROM BOTTOM EDGE OF DOOR)
Note: Bottom bracket may slide up on rod during assembly.
It may be necessary to pull it towards bottom edge of door
with a simple wire hook.
RHR shown
LHR opposite
NON-FIRE RATED DOORS
FIRE RATED DOORS
8a
8b
8a
8c
8a. Attach top latch to door with three screws (six for fire rated doors).
(Disregard steps 8b & 8c if TRO device is being installed)
8b. Attach bottom mounting bracket to bottom latch with four screws.
8c. Attach bottom mounting bracket to door with three screws.
8d. Attach back plate to centerlift mechanism with two screws - DO NOT
OVERTIGHTEN.
Assembly hint: Assemble one screw loosely without backplate,
then add second screw through backplate. Remove first screw,
align backplate and then re-install first screw.