background image

Outdoor 8000

Outdoor 8000

Rechargeable battery/battery status indicator

Battery full

Battery 2/3 full

Battery 1/3 full

Battery flat

If the battery is low, then the battery icon flashes which indicates that the batteries
must be replaced or recharged.

Adjusting the volume of speaker

The volume of the speaker can be adjusted with the

and

buttons.

The adjusted volume of the speaker is indicated on the display.

Receiving signal

The device is always in Receive Mode when it is not switched and
transmitting. If it is receiving a signal in set channel and CTCSS,
the RX icon appears in the display.

You must set your device to the same channel and CTCSS code so that
other parties can receive your transmission.

Using the walkie-talkie

Stopwatch

Turning on/off the device

To turn on: Keep the button           pressed. The device emits a signal tone and the

display indicates the set channel, CTCSS Code and time.

To turn off: Again keep the       button pressed. The device emits a signal tone and

nothing is indicated in the display.

Transmitting signal

Keep the device vertical, position the microphone 10 cm from
the mouth and speak in the microphone.

Changing channels

The walkie-talkie has 8 channels.
To change the channels

Press

once. The current channel flashes in the

display.

Press

or

, to adjust the channel.

Press

, to confirm the selected channel and return to

the Receive Mode.

Press         to confirm and jump to the next option.

The rechargeable/battery status is indicated with the number of segments in battery
symbol of the display.

Keep the 

        

button pressed to transmit.

Release the 

      

button when your transmission has ended.

Press

, to reset the counter.

Keep the button 

     

pressed for 4 seconds to exit the Stopwatch mode.

Keep the button

       

 

  

pressed for 4 second to retrieve the Stopwatch mode.

    

Press

            

, to start the stopwatch.

Press

, to stop the stopwatch.

6

Outdoor 8000

Outdoor 8000

9

Summary of Contents for Outdoor 8000 Duo Case











Reviews: