M100-AT4 Interface Card
Configuration
12
4.
Click on the
Apply
button.
The newly configured analogue access numbers and the corresponding
bundle are displayed in the list on the
PBX Configuration - Ports - a/b
status
page.
Configuring the call distribution
In order to allow incoming calls to be signalled to the designated terminals, the
access numbers configured for the M100-AT4 Interface Card a/b ports must be
assigned to internal call numbers:
1.
Open the
PBX Configuration: Call Distribution: Incoming
menu.
The
PBX Configuration - Call Distribution - Incoming
status page opens.
Previously assigned access numbers are displayed in the list. The list also dis-
plays the access numbers of the a/b ports you have configured.
2.
Click on the access number you wish to assign internal call numbers to.
The
PBX Configuration - Call Distribution -Incoming - <MSN> -
<Time group> - Change
dialogue opens.
3.
Enter up to ten internal call numbers to which incoming external calls are to be
signalled.
4.
Click on the
Apply
button.
5.
Repeat steps 2 to 4 until all allocations have been set in the call distribution.
Summary of Contents for M100-AT4
Page 15: ......
