M100-AT4 Interface Card
Configuration
11
Assigning a route
In order to allow the analogue lines of the M100-AT4 Interface Card to be used for
outgoing calls, the bundle needs to be assigned to a route:
1.
Open the
PBX Configuration: Trunks: Route
menu.
On the status page, the list of previously configured routes is displayed.
2.
Click on the
New
button. Or click on the
Change
button if you want to assign
the bundle to an existing route.
The
PBX Configuration - Trunks - Route - New
or
PBX Configuration -
Trunks - Route - Change
dialogue opens.
3.
Select the bundle you have configured from the
Choice
list and enter a route
name in the
Name
field (only if you are configuring a new route).
Note:
In the
Choice
list, set bundle 2 and bundle 3 to
none
if you do not want the OpenCom 100 to search for an alter-
native bundle if all trunk lines are busy.
4.
Click on the
Apply
button.
The newly configured or changed route is displayed in the list on the
PBX Configuration - Trunks - Route
status page.
Configuring the a/b ports
In the following step, you have to configure each of the M100-AT4 Interface Card
ports:
1.
Open the
PBX Configuration: Ports: a/b
menu.
The
PBX Configuration - Ports - a/b
status page opens. The four M100-AT4
Interface Card ports are displayed for the selected slot.
2.
Click on the desired a/b port.
The
PBX Configuration - Ports - a/b - Change
dialogue opens.
3.
Select the configured bundle from the
Bundle
list and enter the desired access
number in the
Port Ph. No.
field.
Summary of Contents for M100-AT4
Page 15: ......
