1961-M045-O1 Rev B
y
VET-330WH Owner’s Manual
8
OPERATION
Turn the Scale On
Press the
ON/ZERO/OFF
key to turn the scale on. The scale will display
then change to the selected weighing units.
Select the Weighing Unit
Press the
UNIT
key to alternate between the selected weighing units.
NOTE:
The
alternate weighing units must be enabled in the Configuration Mode for this function to
be operational.
Basic Weighing
Place the pet or animal to be weighed on the scale platform. Wait a moment for the
scale display to stabilize, then read the weight.
Zero the Weight Display
If the scale is not showing zero weight on the display, press the
ZERO
key. The weight
display will return to zero (
.
) with the
t
{
s
(Zero) and
{
(Stable) symbols turned.
NOTE:
The scale can be re-zeroed to a maximum of up to 20% of the scale capacity.
Tare the Weight Display
Place the container (e.g., a box, pet carrier, or travel cage) on the scale platform, allow
the scale to stabilize, and then press the
TARE
key. The weight on the scale can be
tared (zeroed off) until the full capacity of the scale is reached. Note that when removing
the container from the scale platform, the scale will display negative weight.
To clear a tare weight, press the
TARE
key with the scale platform empty. This will reset
the weight display to zero.
Hold the Displayed Weight
To hold the displayed weight of the pet or animal, press the
HOLD
key. The arrow
symbol is turned on and will flash to indicate the Hold function is on. Place the pet or
animal on the scale. When the weight on the scale is above 3.3 lb (1.5 kg) and stable,
the arrow will stop flashing and the displayed weight will be held.
The weight on the display will be held until the
HOLD
key is pressed again or the
TARE
key is pressed to turn off the Hold function.
Turn the Scale Off
With the scale turned on, press the
ON/ZERO/OFF
key to turn the scale off.
