DETAIL K2 OPG777(G), Assembly Manual

Page: 13 / 37

v.210816 | 13
SAFETY & OPERATION
QUICK START & TROUBLESHOOTING
QUICK START SETUP
• Add 10W30 oil to the engine
• Add Gas
• Pin one wheel into pivot brake hole, other wheel free turning
• Raise up kick stand
• Turn key on
• Half throttle (choke optional for cold starts)
• Tip the unit back with the cutters off the ground
• Pull start the engine
STUMP GRINDING
• Engine set on highest speed
• Hold tight on bow handle with both hands
• Lower cutters into top of stump, grind to the depth of the cutters
• Raise cutters up and move over for next cut, repeat
• Pivot cutters from side to side to face off remainder of the stump
TROUBLESHOOTING
• ENGINE WON’T START
• Turn key on - check engine oil level - check gas level
• Unplug key switch - if engine starts, replace the key switch
• Follow your engine manual for further troubleshooting
• UNIT VIBRATES
• Check your cutters for missing or loose teeth
• Check your cutter wheel pillar bearing mounting bolts
ENGLISH