background image

Features

The  QT605  is  the  budget-minded  answer  for  both  residential  and  commercial  
in-ceiling speaker applications. The QT605 employs a 6½-inch polygraphite woofer 
cone and a 1-inch swivel fabric dome tweeter for great sound on a budget. The 
QT605 speaker is manufactured with high quality components and engineered 

to accurately reproduce music. Mounting flush to a wall or ceiling, architectural 

speakers  are  ideal  for  many  applications  where  traditional  speakers  may  be 
impractical  or  impossible.  The  QT605  is  especially  well  suited  for  distributing 
sound throughout the entire home and can be used to enhance surround sound 
systems.  When  properly  installed,  the  QT605  will  provide  you  with  years  of 
entertainment pleasure.

The QT605 speaker is packaged with an L-shaped quick installation and removal 
tool,  grille  adhesive,  the  hole  cutout  and  paint  mask  templates.  No other tools 
except wire strippers are required to install the QM-615 speaker once the hole has 
been cut in the ceiling or wall.

2

Painting the Speakers

A paint shield is included with your QT605 speaker. This shield can be used to protect 
the speaker when painting the speaker rim (frame). If you plan to paint your speaker, 
we recommend that it be done prior to installation. If you decide to paint your speaker 
sometime in the future, it is best to remove it by following the simple instructions 
on page 5. When painting the speaker, the paint shields provided in the packaging 
must  be  installed  in  place  of  the  grille.  The  grille  can  also  be  painted.  Painting  the 

speaker grille should be done with a paint sprayer set to fine. Remove the grille from 

the speaker, peel off the grille fabric on the back of the grille and set aside. Place the 

grille on a flat surface. 

Do not use a brush or roller on the speaker grille as it will 

clog the holes

. This will greatly reduce the sound quality of the speakers. Do not paint 

the grille while attached to the speaker. Be sure to remove the paint shield from the 
speaker and replace the grille fabric to the back of the grille before reinstalling the grille 
and using the speakers.

Summary of Contents for QT605













Reviews: